26
OPERATION
3
Press
plus(+)
or
minus(-)
to enable or disable
the feature.
4
Press
START
to accept the change.
Adjusting the Oven Thermostat
Your new oven may cook differently from the one
it replaced. Use your new oven for a few weeks to
become more familiar with it before changing the
temperature settings. If after familiarizing yourself
with the new oven, you still think that it is too hot
or too cold, you can adjust the oven thermostat
yourself.
• To begin, either raise or lower the thermostat 15
°F (8 °C). Try the oven with the new setting. If the
oven still needs adjustment, raise or lower the
thermostat again, using the first adjustment as a
gauge. For example, if the adjustment was too
much, raise or lower the thermostat 10 °F (5 °C).
If the adjustment was not enough, raise or lower
the thermostat 20 °F (12 °C). Proceed in this way
until the oven is adjusted to your satisfaction.
Model LSGL5833*
1
Set the oven mode knob to the
Off
position.
Press and hold
Start Time
for 3 seconds.
Then press
Start Time
repeatedly until
AdJU
appears in the display.
2
Set the number of degrees to adjust:
Press or press and hold the
+/-
buttons until
the desired number of degrees appears in the
display.
3
Press
START
to accept the change.
Model LSGL5831*
1
Press
Settings
repeatedly until
AdJU
appears
in the display.
2
Set the number of degrees to adjust:
Press or press and hold the
+/-
keys until the
desired number of degrees appears in the
display.
3
Press
START
to accept the change.
NOTE
• This adjustment does not affect the broiling or
Self Clean temperatures. The adjustment is
retained in memory after a power failure. The
oven temperature can be increased (+) or
decreased (-) as much as 35 °F or 19 °C.
• Once the temperature is increased or decreased,
the display shows the adjusted temperature
until it readjusts.
Turning the Preheat Alarm Light On/Off
When the oven reaches its set-temperature, the
preheating alarm light flashes 5 times or until the
oven door is opened.
You can activate or deactivate the preheating
alarm light.
Model LSGL5833*
1
Set the oven mode knob to the
Off
position.
Press and hold
Start Time
for 3 seconds.
Then press
Start Time
repeatedly until
PrE
appears in the display.
2
Press
+/-
to turn the light on/off.
3
Press
START
to accept the change.
Model LSGL5831*
1
Press
Settings
repeatedly until
PrE
appears in
the display.
2
Press
+/-
to turn the light on/off.
3
Press
START
to accept the change.
Adjusting the Beeper Volume
Model LSGL5833*
1
Set the oven mode knob to the
Off
position.
Press and hold
Start Time
for 3 seconds.
Then press the
Start Time
key repeatedly
until
BEEP
appears in the display.
2
Press
plus(+)
or
minus(-)
to select the desired
volume.
3
Press
START
to accept the change.
Model LSGL5831*
1
Press
Settings
repeatedly until
Beep
appears
in the display.
2
Press
plus(+)
or
minus(-)
to select the desired
volume.
us_main.book.book Page 26 Wednesday, June 16, 2021 3:46 PM
