22
INSTALLATION
red and radiate heat, and they should cycle on
and off periodically even when the knob is in
the
Hi
position. This cycling prevents the
glass-ceramic from being cracked by thermal
shock.
NOTE
• The Warm Zone does not consume enough
power to glow red.
4
After checking all the surface heating
elements, check the locking system by
pressing
Control Lock
for three seconds. The
oven controller should lock and the cooktop
should not operate while the Control Lock
function is turned on. Pressing
Control Lock
for three seconds to disable Control Lock.
5
Now check the oven's operation. Turn the
oven mode knob to select the
Bake
mode.
350 °F appears in the display. Press
START
.
6
The oven should finish preheating in 15
minutes, and the convection fan should
operate while the oven is preheating.
7
After checking the oven's operation, turn the
temperature up to 450 °F and leave the oven
on for at least an hour to help remove any oil
which might cause smoke and odors when
first using the oven.
NOTE
• Smoke may come out of the range when it is first
used.
us_main.book.book Page 22 Wednesday, February 3, 2021 9:14 AM
Содержание LSEL6335 Series
