LG LRTN09314SW, Руководство по обслуживанию

Страница: 11 / 43

10
Figure 13
Fan and Fan Motor.
1. Remove freezer shelf.
3. Remove the ice bin assembly by
pulling it to the right side, until it
snaps out.
4. Remove Grill Fan screw cover.
See Figure 14.
5. Loosen the screw. See Figure 15.
6. Pull out the fan cover. Figure 16.
Figure 14
Figure 15
6. Unplug the connector.
7. Remove the fan holder shroud.
Figure 17.
8. Remove fan and loosen both
screws that hold the bracket.
9. Remove the motor bracket and the
rubber parts. Pull out the fan
motor. See Figure 17.
Figure 16
Figure 17
Defrost Control Assembly
1. The defrost control assembly
consists of one thermistor and a
fuse that melts with heat.
2. The termistor's function is to
sense the compartment's
temperature and automatically
stop the defrost. The termistor is
located beside of the evaporator
bracket.
3. The melting fuse is a safety device
to prevent an overheating of the
defrosting resistance when it
operates.
4. The fuse melts at 162° F and the
resistance heater stops.
5. To replace this components,
please follow the steps mentioned
at Figure 18.
Lamp.
Refrigerator Compartment Lamp
1. Remove the lamp cover with
a screwdriver or a similar tool.
See Figure 19.
2. Remove the lamp by unscrewing it
counterclockwise and replace it
with the same specifications
(125V,
15
W). Part Number
6912JB2002
G
.
1.
Figure 18. Unplug the connector plugged to
the defrost control assembly and replace
it if necessary.