LG LRMDC2306 Series, Руководство по обслуживанию

Страница: 122 / 134

-1 2 0 -
13-1-10 CONTROL OF FREEZER FAN MOTOR
1. Freezer fan motor has high and standar speed.
2. When refrigerator is overloaded, fan motor runs in high speed as powered-up Standard speeds is used for general
purposes.
3. To improve cooling speed, the RPM of freezer fan motor changs from normal speed to high.
13-1-11 Cooling Fan Motor
1. The cooling fan is switched ON and OFF in conjunction with the compressor.
2. The Failure sensing method is the same as in the fan motor of the freezing fan motor(refer to failure diagnosis function
table for failure display).
13-1-12 Ice Compartment Fan
1. The Icing Fan is controlled by the the sensor on the top of the ice compartment.
2. The Failure sensing method is the same as in the fan motor of the freezer
(refer to failure diagnosis function table for failure display)
13-1-13 Refrigeration room Fan Motor
1. The refrigeration room fan is switched ON and OFF in conjunction with the refrigeration room temperature.
2. The Failure sensing method is the same as in the fan motor of the freezing fan motor (refer to failure diagnosis function
table for failure display).
Copyright © 2019 LG Electronics Inc. All rights
reserved. Only training and service purposes.
NOTE
• When the refrigerator is in the Power Saving Mode, the display remains off until a door is opened or a
button is pressed. Once on, the display remains on for 20 seconds.
NOTE
Display Mode and InstaView Display Mode (For Store Use Only)
• The Display Mode disables all cooling in the refrigerator and freezer sections to conserve energy while
on display in a retail store. When activated, OFF is displayed on the control panel and the display remains
on for 20 seconds.
- To deactivate/activate the Display Mode:
Open either refrigerator door. Press the Ice Plus button 3 times while pressing and holding the
Refrigerator button. The control panel beeps and the temperature settings display to confirm that
Display Mode is deactivated. Use the same procedure to activate Display Mode.
• The InstaView Display Mode automatically turns the LED light inside the InstaView Door-in-Door on and
off in cycles of 10 seconds ON and 2 minutes 50 seconds OFF.
- To activate the InstaView Display Mode:
Activate the Display Mode first. Then open all refrigerator and freezer doors and within 5 seconds
knock 3 times on the door glass.
- To deactivate the InstaView Display Mode:
Open all refrigerator and freezer doors and within 5 seconds knock 3 times on the door glass. The
refrigerator is now in Display Mode.
• To deactivate the Display Mode and InstaView Display Mode at once:
Open either refrigerator door. Press the Ice Plus button 3 times while pressing and holding the
Refrigerator button.