LG LRG30855S Series, Руководство по обучению

Страница: 70 / 74

GAS RANGE Page 69 of 72 TRAINING MANUAL
COMPONENT VOLTAGE TEST MEASUREMENTS
COMPONENT TEST LOCATION CONDITIONS VOLTAGE
Door closed and oven light not
selected ON from control
panel 120 V
AC
Door open 0 V
AC
Oven light OL to N
Door closed and oven light
selected ON from control
panel (relay clicks) 120 V
AC
Bake operation initiated (relay
clicks) 120 V
AC
Bake ignitor Bake to N
Bake not initiated or burner in
cycle OFF status 0 V
AC
Broil operation initiated (relay
clicks) 120 V
AC
Broil ignitor Broil to N
Broil not initiated or burner in
cycle OFF status 0 V
AC
Warming drawer operation
initiated (relay clicks) 120 V
AC
Warming drawer
element WD OUT to N
Warming drawer not initiated
or burner in cycle OFF status 0 V
AC
Door closed and clean cycle
initiated (relay clicks) 120 V
AC
for
10 seconds
(lock door)
Door closed and clean cycle
cancelled (relay clicks) 120 V
AC
for
10 seconds
(unlock door)
Latch motor MDL to N
Door open and clean cycle
initiated (relay clicks) 120 V
AC
until
alarm stops
(25 seconds,
then 0 V
AC
)
Fan motor
high speed GAS F Fan HI to N Door closed and CONV BAKE
or CONV BROIL initiated 120 V
AC
(0 V
AC
during
pre-heat)
Fan motor
low speed GAS S Fan LO to N Door closed and CONV BAKE
or CONV BROIL initiated
120 V
AC
(0 V
AC
during
pre-heat)
Surface ignitor
switches Violet wire
(disconnected from
module) to N Rotate knob to LITE position 120 VAC