LG LRG30855S Series, Руководство по обучению

Страница: 10 / 74

GAS RANGE Page 9 of 72 TRAINING MANUAL
OPERATION
We include brief operating instructions for the technician to allow a thorough
check-out of the appliance and to use during diagnosis and repair.
SURFACE ELEMENTS
There are five surface elements, each of which is a different output. The controls
are all the same, though. Press the knob that corresponds to the element you
wish to operate and turn it counterclockwise (to the left) to the light position. You
will hear the tik-tik-tik of the igniter as it sparks to ignite the gas.
When the burner is lit, turn the knob to
the desired setting. Turn it clockwise to
the OFF position to extinguish the
flame. When one burner control is in
the IGNITE position, the igniters on all
the surface elements will fire. The
surface burners are controlled by
manual valves. These valves have a
low flame or simmer adjustment, which
will be covered later in this manual.
OVEN VENT
The oven is vented through ducts at the rear of the range top. Do not block these
vents while cooking in the oven. Because of the heat, do not leave closed
containers on the cooktop due to the burst hazard. Do not leave plastic or
flammable items on the cooktop; they may melt of ignite. Pot handles and
utensils will become very hot is left on the cooktop near the vent and could cause
burns.
OTHER CONTROLS
The gas oven, electric warming drawer,
convection, and self-cleaning functions
are operated from the electronic
touchpad control on the back of the
range.