background image

CHEF FRESH / SNACK PAN(on some models)

While holding the chef fresh with one hand, pull it forward
slightly. Lift slightly and pull it out.

CRISPER HUMIDITY CONTROL

You can control the amount of humidity in the moisture-
sealed crispers. Adjust the control to any setting between 

and      .

lets moist air out of the crisper for best storage of

fruits.

keeps moist air in the crisper for best storage of

fresh, leafy vegetables.

OBTIBIN CRISPERS

The OptiBin Crispers provide fresher-tasting fruit and
vegetables by letting you easily control humidity inside the
crisper. The OptiBin Crispers include: 1) a humidity
control knob at the front of the crisper cover and 2) a
large lattice on the inner surface of the cover to hold 
or release moisture.

You can store small vegetables or fruits requiring more or
less humidity in separate drawers.

To remove the crisper door flap:
1.

Raise the door as high as it will open.

2.

Using your finger, press the plastic hinge toward the
center of the door flap.

3.

Lift the door out of its place.

4.

Replacement is the opposite of removal. 

To remove the glass:
1.

Lift up the glass after inserting a screwdriver under the
criper cover.

2.

Pull up and out.

To remove the crisper:

1.

Slide crisper straight out to the stop.

2.

Lift the front of the crisper, then pull it out to remove.

3. Replace the crisper

by sliding it back in fully past the

drawer stop.

USING YOUR REFRIGERATOR

21

Содержание LRDC2073 Series





































Отзывы: