13
4. Removing dispenser
Loosen the screws (1) and remove the deco (2) using a
flat screwdriver.
Loosen the 2 screws (3) to remove the nozzle.
Gently lift the nozzle (4) enough for the feed water tube
to be completely pulled out.
Pull up the water tube (5) while pressing area<1> shown
in the figure to the right.
NOTE
: If a tube end is deformed or abraded, cut the part
away.
Remove the guide tube (6).
5. Installing dispenser
Insert the water tube provided into the hole (A).
NOTE
: Put the connection wires into the hole (A) until the
connector is flat with the cover.
After the tube is fed through the hole, expose the
end of the tube by 5 inches.
REFRIGERATOR INSTALLATION
4
3
0
0
1
2
0
Содержание LRDC2073 Series
Страница 36: ...NOTES 36 ...