1. Removing Refrigerator Door
Loosen the screw (1) and remove the top hinge cover (2).
Pull up the water valve tube (3) while pressing area<1>
shown in the figure to the right.
CAUTION:
If a tube end is deformed or worn out, cut the
part away.
If the water dispenser is in use, be careful that
the water flows freely.
Separate the connection wire (4).
Remove the guide tube (5).
Remove the 3 screws (6) and lift off the top hinge (7).
Lift off the refrigerator door (8) slightly and remove it.
Loosen the screw (9) using 10mm hex-head socket
wrench and remove the top hinge cover (10).
Pry off the cover (11) using a slotted screwdriver and
Attach it on the right.
Loosen the 2 screws (12) and attach it on the right.
Lift off the washer (13) on the middle hinge pin.
Loosen the pin (14) using a 1/4 -inch hex-head socket
wrench and remove it.
Remove the 2 screws 10mm (15), the 2 screws (16),
REFRIGERATOR INSTALLATION
1
11
and lift up the middle hinge (17).
Содержание LRDC2073 Series
Страница 36: ...NOTES 36 ...