10
EN
Before Installation the Air
Conditioner
PREPARING FOR OPERATION
Refer to the Installation Instructions included in this
manual before using the air conditioner. Once the
air conditioner has been properly assembled and
installed:
1
Plug the power cord into its own dedicated
properly grounded outlet. Do not plug other
appliances into the same outlet. Doing so
could overload the outlet and create a fire
hazard.
2
Make sure the air conditioner and cord are
positioned where they do not create a tripping
hazard and will receive adequate ventilation.
Do not place the appliance near furniture or
objects that could block the vent openings.
3
Make sure that any items that could be blown
over or damaged by the airflow from the fan
are out of the airflow path.
IMPORTANT:
•
Do not remain in the direct airflow from the air
conditioner for extended periods of time.
•
When used at the same time as stoves,
fireplaces, and other combustion devices,
make sure there is a sufficient flow of fresh air
into the room. Do not use in tightly enclosed
spaces with these types of devices.
•
This air conditioner is intended for household
use as a consumer comfort appliance. Do not
use it as a precision climate control system,
or for purposes such as cooling precision
equipment, food, pets, plants, artwork, etc.
Such items could be damaged.
•
Do not bend the hose downward when window
installation kit is not applied. It may cause
failure of air conditioner or performance
deterioration.
UNPACKING THE AIR CONDITIONER
Remove and store packing materials for reuse.
Remove any shipping tape before using the
air conditioner. If the tape leaves behind any
adhesive, rub a small amount of liquid dish soap
onto it and wipe with a damp cloth. Do NOT use
sharp instruments, alcohol, thinners, or abrasive
cleaners to remove adhesive. They could damage
the finish.
Wireless Remote Control
Inserting Batteries
If the display screen of the remote control begins
to fade, replace the batteries. Insert AAA (1.5 V)
batteries before using the remote control.
1
Remove the cover on the back of the remote
control.
2
With the plus and minus poles facing as
marked, insert two new AAA 1.5V batteries.
NOTE
•
Two new batteries are supplied with the air
conditioner for use in the remote control.
•
Do not use a rechargeable battery. Make sure
that the battery is new.
•
In order to prevent discharge, remove the
battery from the remote control if the air
conditioner is not going to be used for an
extended period of time.
•
Keep the remote control away from extremely
hot or humid places.
•
To maintain optimal operation of the remote
control, the remote sensor should not be
exposed to direct sunlight.
