2. PERFORMANCE
- 22 -
Copyright © 2012 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
LG-P880 Product SPEC
18
Rx Adjacent Channel
Rejection
PER ≤ 10%,
ACR ≥ [email protected], ACR ≥ 13dB@13Mbps,
ACR ≥ [email protected], ACR ≥ 8dB@26Mbps,
ACR ≥ 4dB@39Mbps, ACR ≥ 0dB@52Mbps
ACR ≥ [email protected], ACR ≥ -2dB@65Mbps
※
ACR shall be measured by setting the desired signal's strength 3
dB above the rate-dependent
Sensitivity specified in min input sensitivity
11) GPS receiver specification
Item
Specification
Receive Frequency
1574.42 MHz ~ 1576.42 MHz
Minimum Sensitivity
1 satellite ≥-142dBm, 7 satellites ≥ -147dBm at coarse time aiding
12) Current consumption
Stand by
Voice Call
VT
Bluetooth Off
Bluetooth Connected
WCDMA
Only
4.0 mA under
(DRX=1.28)
6 mA under
(DRX=1.28)
270 mA under
(Tx=12dBm)
NA
GSM
Only
4.0 mA under
(Paging=5 period)
6 mA under
(Paging=5 period)
340 mA under
(Tx=Max)
** Test condition for Standby current consumption should be as below.
: Measurement time 1hr, with Agilent & CMT JIG
13) Battery life time
Stand by
Voice Call
VT
WCDMA
500 hours over
(DRX = 1.28)
430 min over
(TX = 12dBm,
Low Pwr mode)
NA
GSM
500 hours over
(Paging Period = 5)
430 min over
(TX Level = Max)
LG-P880 Product SPEC
18
Rx Adjacent Channel
Rejection
PER ≤ 10%,
ACR ≥ [email protected], ACR ≥ 13dB@13Mbps,
ACR ≥ [email protected], ACR ≥ 8dB@26Mbps,
ACR ≥ 4dB@39Mbps, ACR ≥ 0dB@52Mbps
ACR ≥ [email protected], ACR ≥ -2dB@65Mbps
※
ACR shall be measured by setting the desired signal's strength 3
dB above the rate-dependent
Sensitivity specified in min input sensitivity
11) GPS receiver specification
Item
Specification
Receive Frequency
1574.42 MHz ~ 1576.42 MHz
Minimum Sensitivity
1 satellite ≥-142dBm, 7 satellites ≥ -147dBm at coarse time aiding
12) Current consumption
Stand by
Voice Call
VT
Bluetooth Off
Bluetooth Connected
WCDMA
Only
4.0 mA under
(DRX=1.28)
6 mA under
(DRX=1.28)
270 mA under
(Tx=12dBm)
NA
GSM
Only
4.0 mA under
(Paging=5 period)
6 mA under
(Paging=5 period)
340 mA under
(Tx=Max)
** Test condition for Standby current consumption should be as below.
: Measurement time 1hr, with Agilent & CMT JIG
13) Battery life time
Stand by
Voice Call
VT
WCDMA
500 hours over
(DRX = 1.28)
430 min over
(TX = 12dBm,
Low Pwr mode)
NA
GSM
500 hours over
(Paging Period = 5)
430 min over
(TX Level = Max)
11) GPS receiver specification
12) Current consumption
13) Battery life time