NSTALLATION INSTRUCTIONS
I
6
Step 3 :
PREPARING THE DISHWASHER
FOR INSTALLATION
1
2
Lay the dishwasher on its back.
Adjust the legs to the required height
as shown in below figure.
Step 4 :
INSTALLING THE
DISHWASHER IN CUPBOARD
1
2
Before sliding the dishwasher into the
cupboard opening, all necessary height
and balancing adjustments should be
made using a spanner.
Slide the dishwasher into the cabinet
opening carefully. Make sure that the
drain hose inside the cabinet is not
kinked or stretched.
3
Snap the left(right) rail onto the
left(right) feet of the base. The
adjustment screw should be facing
toward the front.
4
Set the dishwasher upright.
The Leveling kit consists of two
rails. Rail A is the left rail, and rail
B is the right rail. Turn the front
adjustment screw to level the
dishwasher.(step8)
LEFT RAIL - A
RIGHT RAIL - B
CAUTION
Adjusting the fully seated rear feet in
the wrong direction, especially with a
power screwdriver, can damage the
adjusting mechanism.
Note
Do not use the leveling kit if the counter
height dimensions are too low. In this
case, the rear feet must be adjusted before
installing the dishwasher into the cabinet.
