UNCTION OF CONTROL BUTTON
F
10
Program
Program
• To select a program, press this button.
UV
• If you want to sterilize the dishes, press
UV
button.
• After drying cycle, the
UV
lamp will turn on to perform the sterilization function.
• At this time, “St” will be displayed in display window.
• When you open the door of dishwasher, UV lamp is turned off.
Don’t look at the lamp directly with the naked eye.
Indicator
• Child Lock.
• Refill with rinse aid.
Time Left
• Before starting, the display window shows the running time of the selected program.
• After starting, the display window shows the remaining time. These times may vary due to extraneous conditions.
• If the dishwasher has trouble, the trouble type is displayed.
“OE”, “FE”, “IE”, “EI”, “HE”, “CE”, “LE”, “tE”
• If these error letters are displayed, please refer to the trouble shooting guide page 25 and follow the guide.
Beep On/Off
• The dishwasher must be switched on.
• The beep on/off function can be set by pressing the
Half Load
and
Spray
button simultaneously for a few seconds.
Then, an “On” will appear in the display.
• The beep on/off function is automatically canceled when a mains power failure occurs.
MODEL : LD-1420I1
