55
MAINTENANCE
ENGLISH
Replacing Lamp on Top Wall
1
Unplug oven or disconnect power.
2
Remove oven racks.
3
Slide a flat blade screwdriver between the
housing and the glass light cover.
4
Support the glass light cover with two fingers to
prevent the cover from falling to the bottom of
the oven.
Glass Light Cover
5
Gently twist the screwdriver blade to loosen the
glass light cover.
Flat Blade
Screwdriver
Clip
6
Remove bulb from socket.
7
Replace bulb, replace light cover by snapping
back into place and push the clip to hold the
glass light cover tightly.
Bulb
8
Plug in oven or reconnect power.
Cleaning the Exterior
Painted and Decorative Trim
For general cleaning, use a cloth with hot soapy
water. For more difficult soils and built-up grease,
apply a liquid detergent directly onto the soil. Leave it
on for 30 to 60 minutes. Rinse with a damp cloth and
dry. Do not use abrasive cleaners.
Stainless Steel Surfaces
To avoid scratches, do not use steel wool pads.
1
Place a small amount of stainless steel
appliance cleaner or polish on a damp cloth or
paper towel.
2
Clean a small area, rubbing with the grain of the
stainless steel if applicable.
3
Dry and buff with a clean, dry paper towel or soft
cloth.
4
Repeat as necessary.
NOTE
•
Do not use a steel wool pad. it will scratch the
surface.
•
To clean the stainless steel surface, use warm
sudsy water or a stainless steel cleaner or
polish.
•
Always wipe in the direction of the metal
surface finish.
•
To purchase stainless steel appliance cleaner
or polish, or to locate a dealer near you, call our
toll-free customer service number:
1-800-243-0000 (USA),
1-888-542-2623(CANADA)
or visit our website at: www.lg.com