21
Ge
tting st
ar
te
d
Attention:
]
Avoid using the Flash Memory Card when the battery
is low.
]
When writing to the card, wait for the operation to
complete before removing the card.
]
The card is designed to fit easily into the system one
way only.
]
Do not bend the card or force it into the slot.
]
Do not insert any memory cards other than those
made by memory card.
]
If the memory card has been formatted using FAT32,
format the memory card using FAT16 again.
For more information on the memory card, please refer
to the memory card instruction manual.
Memory card formatting
Before you start to use the memory card you have to
format it. After you insert the memory card, select
Menu
>
Organiser
>
Memory,
then press .
This operation should only be done when you insert
the memory card for the first time. During formatting
various folders will be created for different data types.
Turning the handset on/off
Turning your handset on
Ensure that your USIM card is in your handset and the
battery is charged. Press and hold
until the power
comes on. Enter the USIM PIN code that was supplied
with your USIM card if the
PIN code request
is set to
On
. (Note: Please refer to page 69)
After a few seconds you will be registered on the
network.
Turning your handset off
Press and hold
until the power goes off. Or press
and select
Switch off!
. There may be a few
seconds delay while the handset powers down. Do not
turn the handset on again during this time.