14
OPERATION
6
Clean Filter
Using the Light Off Function
The Clean Filter LED lights up to notify you
You can set the brightness of the control panel.
7
Fan Speed
Press to set the fan speed to Low (F1),
Medium (F2), or High (F3).
8
Temperature Control
The thermostat monitors room temperature
to maintain the desired temperature. The
thermostat can be set between 16 °C–30 °C
(60 °F–86 °F). Press
9
Energy Saver
In this mode the compressor and fan turn
off when the set temperature is achieved.
Approximately every 3 minutes the fan turns
on to allow the unit sensor to accurately
determine if more cooling is needed.
10 Clear
Cancel Sleep and Timer settings. Also set
the Diagnosis if held for 5 seconds.
NOTE
●
Auto Restart:
If the air conditioner turns off due
to a power outage, it will restart automatically
once the power is restored, with the same
settings as were set before the unit turned off.
●
Energy Saver:
The unit defaults to the Energy
Saver mode each time the unit is switched on
except in Fan mode or when power is restored
after an electrical power outage.
●
The remote control will not function properly if
the AC infrared sensor is exposed to direct light
or if there are obstacles between the remote
controller and the air conditioner.
Temp
and
together on the control panel to turn off the
Clean Filter light.
NOTE
●
control panel, not the remote control.
●
This feature is a reminder to clean the air
light turns on after 250 hours of operation.
or
arrows to
increase or decrease temperature setting.
NOTE
●
This function is available with Cooling
Mode.
NOTE
●
Turn on/off the control panel.
●
Press
Mode
button on the
remote control
for
3 seconds, or
●
Press
Mode
and
Sleep
button together on the
control panel
．
Using the Auto Clean Function
In the Cooling and Dry Mode, Moisture is
removes such moisture.
generated inside the indoor unit. This function
NOTE
●
If you turn off the unit, the fan continues to run
for 10 minutes and cleans the inside of the
indoor unit.
●
Press
Energy Saver
button on the
remote
control
for 3 seconds.
●
is displayed on the remote control.
●
Default temperature will be minimum 24 °C (in
cooling cycle), when operated with remote
control except power failure/power switched
off.
Содержание JW-Q18WUXA1
Страница 24: ......
