LG JTNQ36GNLE5 Скачать руководство пользователя страница 41

Страница: 41 / 44

IMPORT

ANT SAFETY INS

TRUCTIONS

READ ALL INS

TRUCTIONS BEFORE USING

THE APPLIANCE

Always comply with the following precautions to avoid dangerous situations and ensure peak

performance of your product

WARNING

It can result in serious injury or death when the directions are ignored

UTION

It can result in minor injury or product damage when the directions are ignored

WARNING

• Installation or repairs made by unqualified persons can result in hazards to you and others.

• Installation MUST conform with local building codes or

, in the absence of local codes, with

the Nation Electrical Code NFPA

70/ANSI C1-1003 or current edition and Canadian Electrical

Code Part1 CSA C.22.1.

• The information contained in the manual is intended for use by a qualified service technician

familiar with safety procedures and equipped with the proper tools and test instruments.

• Failure to carefully read and follow all instructions in this manual can result in equipment mal-

function, property damage, personal injury and/or death.

Installation

• Always perform grounding. - Otherwise, it may cause electrical shock.

• Don’t use a power cord, a plug or a loose socket which is damaged. - Otherwise, it may cause a fire

or electrical shock.

• For installation of the product, always contact the service center or a professional installation

agency. - Otherwise, it may cause a fire, electrical shock, explosion or injury

• Securely attach the electrical part cover to the indoor unit and the service panel to the outdoor unit.

- If the electrical part cover of the indoor unit and the service panel of the outdoor unit are not

attached securely, it could result in a fire or electric shock due to dust, water

, etc.

• Always install an air leakage breaker and a dedicated switching board. - No installation may cause a

fire and electrical shock.

• Do not keep or use flammable gases or combustibles near the air conditioner. - Otherwise, it may

cause a fire or the failure of product.

• Ensure that an installation frame of the outdoor unit is not damaged due to use for a long time.

- It may cause injury or an accident.

• Do not disassemble or repair the product randomly. - It will cause a fire or electrical shock.

• Do not install the product at a place that there is concern of falling down. - Otherwise, it may result

in personal injury.

• Use caution when unpacking and installing. - Sharp edges may cause injury.

Operation

• Do not share the outlet with other appliances. - It will cause an electric shock or a fire due to heat

generation.

• Do not use the damaged power cord. - Otherwise, it may cause a fire or electrical shock.

SAFETY PRE

CAUTIONS

ENGLISH

Содержание JTNQ36GNLE5













































Результаты поиска

Содержание JTNQ36GNLE5

Отзывы:

Похожие инструкции для JTNQ36GNLE5

Бренды по названию

Популярные бренды

LG JTNQ36GNLE5, Руководство пользователя

Результаты поиска

Содержание JTNQ36GNLE5

Отзывы:

Похожие инструкции для JTNQ36GNLE5

Бренды по названию

Популярные бренды