LG JTNQ36GNLE5, Руководство пользователя

Страница: 35 / 44

10
ENGLISH
THE INDOOR UNIT INSTALLA TION
Precautions when laying power
wiring
Use round pressure terminals for connections
to the power terminal block.
When none are available, follow the instruc-
tions below.
- Do not connect wiring of different thickness-
es to the power terminal block. (Slack in the
power wiring may cause abnormal heat.)
- When connecting wiring which is the same
thickness, do as shown in the figure below.
CA UTION
The connecting cable connected to the
indoor and outdoor unit should be com-
plied with the following specifications
(This equipment shall be provided with a
cord set complying with the national regu-
lation).
!
CA UTION
The Power cord connected to the unit
should be selected according to the fol-
lowing specifications.
!
If the supply cord is damaged, it must be
replaced by a special cord or assembly
available from the manufacturer of its
service agent.
NORMAL
CROSS -SE CTIONAL
AREA 0 .75mm
2
20mm
35±5mm
GN/
YL
10±3mm
Po wer wirer
Round pr essur e terminal
Connect same thicknes s
wiring to bo th sides.
It is forbidden t o
connect tw o to one
side.
It is forbidden t o
connect wiring of
differ ent thicknesses.
- For wiring, use the designated power wire
and connect firmly, then secure to prevent
outside pressure being exerted on the termi-
nal block.
- Use an appropriate screwdriver for tightening
the terinal screws. A screwdriver with a
small head will strip the head and make prop-
er tighterning impossible.
- Over-tightening the terminal screws may
break them.