LG JBNQ18GB2A1, Руководство пользователя

Страница: 35 / 48

1)Connecting thepipes tothe
Outdoorunit
1.A lig nt he ce nte ro ft he pip in gs an d
su ffi cie ntl y tig hte n th e fla re n ut w ith
finger s.
2.Finall y ,tighten theflare nut withtor que
wrenchuntilthe wrenchc licks.
•When tighteningthe flaren utwith torque
wrench,ensure thedirection for
tighteningf ollows thearro won the
wrench.
4. Connecting Pipes to the Outdoor Unit
T orque wrench
Outdoor unit
Gas side piping
(Bigger Dia.)
Liquid side piping
(Smaller Dia.)
Pipesiz e T orque
1/4" 1.8kg.m
3/8" 4.2kg.m
1/2" 5.5kg.m
5/8" 6.6kg.m
3/4" 6.6kg.m
5. IR Remote Sensor Installation & Operation
• Install the IR remote sensor about 6 f eet above the floor in an area with good air circulation at an a ver age temperature .
Do not install the IR remote sensor where it can be aff ected by:
- Drafts , or dead spots behind doors and in corners .
- Hot or cold air from ducts.
- Radiant heat from sun or appliances.
- Concealed pipes and chimneys .
- Uncontrolled areas such as an outside wall
behind the remote controller.
- This IR remote sensor is equipped with
LED display and ON/OFF b utton. F or proper
display of the IR remote sensor
The IR remote sensor should be installed
properly as sho wn in Fig.1.
(The standard height is 6 feet from floor
level.)
Rem ote
Con tro lle r
TE MP
6feet
no
no
no
Remote Controller
TEMP
Fig.1 Typical locations f or IR Remote Sensor
yes-Optional
Remote Controller
TEMP
yes
14