LG HOM-BOT 2.0 страница 4 Скачать руководство пользователя

Страница: 4 / 37

SAFETY PRECAUTIONS

The purpose of the safety precautions described below is for the user to use the product safely and

correctly to prevent any unexpected risk of injury or damage.

Basic safety precautions

Make sure the power cord of the

home station is not crushed under a

heavy object or damaged by contact

with sharp objects.

Failure to follow this warning can cause

electric shock, fire or product failure.

If the power cord is broken, do not

plug it in. Take the product to an LG

Electronics Authorised service repairer.

Do not place the home station and

the HOM-BOT 2.0 near a heating

device.

Doing so can cause product

deformation, fire, or product failure.

Do not force the power plug to

bend. Do not use the power plug

when it has been damaged or

loosened.

Doing so can cause fire or product

failure.

Never use the HOM-BOT 2.0 with

a battery and/or home station from

any other product than the

HOM-BOT 2.0.

Doing so can cause fire or product

failure.

Do not use the HOM-BOT 2.0 when

candles or fragile objects are placed

on the floor.

Doing so can cause fire or product

failure.

Always use a dedicated outlet with

5A or above.

If multiple appliances are connected

to an outlet simultaneously, they

can generate enough heat to cause

a fire.

When pulling out the power plug,

always pull it out by grabbing the

plug, not the cord. When pulling out

the power plug, do not to touch the

prongs with your fingers.

Doing so can cause an electric shock.

After reading this manual, please keep it in an easily accessible location.

This is the safety alert symbol. This symbol alerts you to potential hazards that can result in

property damage and/or serious bodily harm or death.

Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

Non-compliance with the instruction is highly probable of death or serious injury of users.

Indicates a hazardous situation which, if not avoided, could result in minor or moderate

injury.

WARNING

DANGER

WARNING

CAUTION

Do not touch the power plug with

wet hands.

Doing so can cause electric shock.

Do not allow children or pets to play

with or rest upon the HOM-BOT 2.0

at any time. Do not use the HOM-BOT

2.0 while an object is hanging from it.

Doing so can cause injury or

product damage.

Do not spray or suck in inflammable

materials, surfactants, or drinking water

in the vicinity of the HOM-BOT 2.0.

Doing so can cause fire or product failure.

* Inflammable materials: gasoline,

thinner, etc.

* Surfactant: detergent, articles for

bath, etc.

Do not insert any part of the body,

such as a hand or foot, below the

brush or wheels of the

HOM-BOT 2.0 while in use.

Doing so can cause injury or

product damage.

Turn the power supply off

immediately if any abnormal sound,

odor, or smoke is generated from

the HOM-BOT 2.0.

Failure to do so can cause fire or

product failure.

Gasolin

Detergent

Содержание HOM-BOT 2.0






































Результаты поиска

Содержание HOM-BOT 2.0

Отзывы:

Похожие инструкции для HOM-BOT 2.0

Бренды по названию

Популярные бренды

LG HOM-BOT 2.0, Руководство пользователя

Результаты поиска

Содержание HOM-BOT 2.0

Отзывы:

Похожие инструкции для HOM-BOT 2.0

Бренды по названию

Популярные бренды