12
OVERVIEW
1
Install the home station. (Page 13)
Insert the power cord plug into an outlet and locate the
station against a wall. If power is not supplied to the
home station, the HOM-BOT 2.0 will not charge.
2
Turn on the power supply of the HOM-BOT 2.0.
(Page 14)
Turn on the power switch located on the bottom of
the HOM-BOT 2.0 and press the upper START/STOP
button to turn on the power supply.
※
If the power supply is not turned on, refer to page 14.
3
Check the dust bin.
Check the cleanness of the dust bin before start
cleaning and close the cover of the dust bin on the
main unit.
4
Start cleaning. (Page 15)
Press the START/STOP button once again while the
HOM-BOT 2.0 is turned on. You will hear the sound of
cleaning and cleaning will begin.
5
6
Automatic charge. (Page 16-17)
Use the cleaning mode and auxiliary functions.
(Page 18-22)
The HOM-BOT 2.0 will self-diagnose and automatically
return to the home station to recharge before the
complete discharge of the battery. It takes approximately
three hours to charge the battery.
With the HOM-BOT 2.0 and remote controller button,
the cleaning method and auxiliary functions can be used.
Zigzag or spatial expansion cleaning method can be
selected for the cleaning mode and manual cleaning,
spot cleaning, timer cleaning and micro fiber mop
cleaning can be selected for auxiliary function.
Warning When HOM-BOT 2.0 is operated with the cover of the dust bin open,
it can cause an injury or serious damage to the product.
Flickering
