background image

• Please pay attention to handling Electrostatic

Sensitive Devices, you may use anti-static 
products such as wrist straps, heel straps, mats
to protect your body from electrostatic.

• Make sure you have a personal computer with

one or two open USB ports before connecting
the drive to your computer.

• Power for all other devices should be turn off

before attaching the cables.

Connect the drive to the computer as shown in
figure.

1

Connect the USB 2.0 (Y type) cable to
the drive.

2

Connect the other end of the USB 2.0
cable to your computer.

3

The drive may get its power from the PC
USB power. All systems may not meet
USB power requirements and full 
performance may not be achieved. 
In this case, connect to the USB power
cable.

When the computer is ready, confirm that the
drive is detected. And then, insert the supplied
software CD into the drive and install the 
software.

• Please do not connect the USB cables by any means other than specified above. 

Using the wrong type of cable with this drive can cause it to malfunction.

•  The machine does not have an ON/OFF switch. 

As soon as it is connected to the AC power, the power up sequence begins. 
The power supply cord is intended to serve as the main disconnect device. 
The power outlet shall be near the equipment and shall be easily accessible.

•  The appliance is not intended for use by young children or infirm persons without supervision.

Young Children should be supervised to ensure that they do not play with appliance.

•  If the appliance is supplied from a cord extension set or an electrical portable outlet device, the cord 

extension set on electrical portable outlet device must be positioned so that it is not subject to splashing 
or ingress of moisture.

Installation

NOTES

Connecting to computer

Hardware Installation

NOTES

USB Power cable

1

2

3

Содержание GP08

Страница 1: ...sert the supplied software CD into the drive and install the software Please do not connect the USB cables by any means other than specified above Using the wrong type of cable with this drive can cause it to malfunction The machine does not have an ON OFF switch As soon as it is connected to the AC power the power up sequence begins The power supply cord is intended to serve as the main disconnec...

Страница 2: ... performing the following operation 1 Stop the application software being currently used 2 Click the icon of the taskbar located on your screen s bottom right side 3 Click Safely Remove USB Mass Storage Device Drive x 4 Click Ok and then remove the USB converter cable 1 2 3 4 This following is the general figure of the design of the drive The drive s appearance and specifications may change withou...

Страница 3: ...S CD R CD RW DVD R DVD RW DVD R DVD RW DVD RAM DVD R DL discs CPU Memory The drive s appearance and specifications may change without prior notice The maximum data transfer rate varies according to the performance capabilities of the PC For the sake of periodic improvements specifications and appearance are subject to change without notice We have taken all possible measures to assure the quality ...

Страница 4: ...eyes Do not attempt to open the cover To reduce the risk of electric shock do not remove the cover or back There are no user serviceable parts inside Refer servicing to qualified service personnel Use of controls or performance of procedures other than those specified herein may result in hazardous radiation exposure WARNING To reduce the risk of fire or electric shock do not expose this appliance...

Отзывы: