manualshive.com logo in svg

LG GC-B197HWL, Руководство по обслуживанию

Поделиться
Скачать
LG GC-B197HWL Скачать руководство пользователя страница 87

4. HOW TO DEAL WITH CLAIMS

4-1. Sound

TROUBLE DIAGNOSIS

- 

87

 -

Problems

Checks and Measures

"Whizz" sounds

■

Explain general principles of sounds.

• All refrigerator when functioning properly have normal operating sound. The

compressor and fan produce sounds.
There is a fan in the freezer compartment which blows cool air to freezer and
refrigerator compartments. "Whizz" sounds are heard when the air passes
through the narrow holes into the freezer and refrigerator compartments.

■

Cooling Fan sound in the compressor compartment.

• There is a fan on the back of the refrigerator, which cools the compressor

compartment. If there is a small space between the refrigerator and the wall, the
air circulation sounds may be noticeable.

■

Noise of Compressor.

• This operating sound happens when the compressor compresses the

refrigerant. The compressor rotates at 3600RPM. The sound of compressor
operation becomes louder as the refrigerator capacity increases.

"Click" sounds

■

Explain the principles of temperature change.

• The sounds happens when pipes and internal evaporator in the refrigerator

compartment expand and contract as the temperature changes during the
refrigerator operation. This sound also happens during defrosting, twice a day,
when the ice on the evaporator melts.

"Clunk" sound

■

Explain that it comes from the compressor when the refrigerator starts.

• When the refrigerator operates, the piston and motor in the compressor rotate

at 3600RPM. This sound is caused by the vibration of motor and piston when
they start and finish their operation. This phenomena can be compared with that
of cars. When the car engine ignites and starts to rotate, the loud sound
becomes gradually quiet. When the engine stops, it stops with vibration.

Vibration sound

■

Check the sound whether it comes from the pipes vibration and friction.

• Insert rubber or leave a space between pipes to avoid the noise.
• Fix the fan blade if the noise is due to the collision of fan and shroud.
• Fix the drip tray if it is loosened.

■

Sound depends on the installation location.

• Sound becomes louder if the refrigerator is installed on a wooden floor or near a

wooden wall. Move it to the another location.

• If the refrigerator is not leveled properly, a small vibration can make a loud

sound. Please adjust the level of the refrigerator.

Содержание GC-B197HWL




































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды