manualshive.com logo in svg

LG GC-B197HWL, Руководство по обслуживанию

Поделиться
Скачать
LG GC-B197HWL Скачать руководство пользователя страница 74

2-8. Odor

TROUBLE DIAGNOSIS

Problems

Causes

Checks

Measures

Remarks

Food Odor.

Food (garlic, kimchi, etc)

- Check the food is not wrapped.

- Dry deodorizer in the shiny and 

- Check the shelves or inner 

windy place.

wall are stained with food juice.

- Store the food in the closed

- Check the food in the vinyl wraps.

container instead of vinyl wraps.

- Chedk food cleanliness.

- Clean the refrigerator and set 

button at "strong".

Plastic Odor.

Odors of mixed food and plastic 

- Check wet food is wrapped with 

- Clean the refrigerator.

odors.

plastic bowl and bag.

- Persuade customers not to use

- It happens in the new refrigerator.

plastic bag or wraps with wet food

or odorous foods.

Odor from the

Odor from the old deodorizer.

- Check the deodorizer odors.

- Dry the deodorizer with dryer and 

*Deodorizer : option

deodorizer.

then in the shiny and windy place.

- Remove and replace the 

deodorants.

-74-

Содержание GC-B197HWL




































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды