Your refrigerator is designed with a reversible door so that is may open from either left or right. It is best to
reposition the door hinge as necessary at the outset since it is inconvenient to do so later.
To change the door hinge please refer to the diagram below and proceed as follows:—
1. Remove Hinge Cover (A) and Hinge Cap (B).
2. Loosen three bolts (C) and remove Upper Hinge (D).
3. Remove Door.
4. Lay down Refrigerator.
5. Loosen two bolts (E) and remove Lower Hinge (F) and Washer (G).
6. Loosen Bolt (H) and remove Leg (J).
7. Insert Washer (G) to Lower Hinge (F) and fix them on the opposite side using two bolts (E).
8. Fix Leg (J) using Bolt (H).
9. Remove Hinge Cap (K) from Door and fix it on the opposite side.
10. Insert Door into Lower Hinge (F), insert Upper Hinge (D) to Door, and then fix it using three bolts (C).
11. Replace Hinge Cover (A) and Hinge Cap (B).
12. Carefully stand the appliance up, (you will need assistance to do this), and position it in its permanent
location.
13. Check that the door opens and closes easily. Ensure that the door seal does not bind on the hinge side
creating gaps which would allow air into the interior. Adjust the hinges if necessary.
This appliance should be stood on a firm, level floor with sufficient space for free airflow around it. (At least
10mm all round and, subject to location, 20mm beneath the worksurface). Avoid positions close to walls or
corners. There must be sufficient room for free ventilation particularly at the back. The unit should be locat-
ed away from direct heat sources, such as cookers, radiators and direct sunlight. If the unit is positioned
where the temperature is too low, condensation will form on the outside of the cabinet. Normal room tem-
perature is recommended.
Avoid locations which may be affected by draughts or dampness as this will impair the efficiency of the
product.
REPOSITIONING THE DOOR HINGE(Option)
H
G
F
E
J
A
B
K
D
C
10
Note
Reversing the doors is not covered by the warranty.
Содержание GC-051SW
Страница 1: ......
