LG F14030RD Скачать руководство пользователя страница 8

Страница: 8 / 51

4. INSTALLATION

INSTALLATION

The appliance should be installed as follows.

Check the conditions of installation area.

1. Check level ground.

On raised foundations or upper level homes, the

vibrations

can be caused by the type of flooring.

It may be

necessary to move

the

machine

to a different area in the home or have the floor

reinforced to properly support the operation of the unit.

2. Check humidity or any foreign objects under the feet.

Clean the floor, and there should not be any foreign objects under the feet.
If the unit has foreign objects underneath the feet, this will prevent the unit from being leveled properly
and will cause

vibrations

and

slipping

Remove any foreign objects

, if any from underneath the machine and level unit properly.

See below for examples of foreign objects.

Open the box and check appliance condition.

horizontal

Capet

Paper

Laminated

paper

Washer

Packing Support
(Packing support may not be used depending on models.)

Wrench

This leveling (or spanner) wrench must
be used to remove the shipping bolts
and level the unit. This should be kept
for future use.

Base Packing

Purchased

stopper

Содержание F14030RD




















































Результаты поиска

Содержание F14030RD

Отзывы:

Похожие инструкции для F14030RD

Бренды по названию

Популярные бренды

LG F14030RD, Руководство по обслуживанию

Результаты поиска

Содержание F14030RD

Отзывы:

Похожие инструкции для F14030RD

Бренды по названию

Популярные бренды