21
Install
ation
2
Installation
C
To
(+) terminal
(Red)
To
(-) terminal
(Black)
Insert the battery DC cables into the cap of
the cable gland and insert the cables into two
holes of the rubber itting one by one.
NOTE
y
For DC cables of battery connections, the
cross-sectional area of lead wire between
2.5 mm
2
and 4 mm
2
is recommended.
y
The maximum cable diameter for the cable
gland is 4 mm. (including sheath)
D
Insert the battery DC cables through the
battery DC cable gland.
NOTE
When inserting cables into the product, make
sure not to damage internal components.
E
Wire-end Ferrules
Battery DC cable
(A)
15 mm
Strip the battery DC cables and assemble wire-
end ferrules on each wire.
1. Strip a DC cable about 15 mm length and
insert a wire-end ferrule into the cable.
2. Crimp the ferrule end using wire-end ferrule
crimping tool (A).
NOTE
Cables and wire-end ferrules are not supplied
on this product package. The system
installer is responsible for selecting proper
components for the installation such as
cables and wire-end ferrules.
