14
Installation
Install
ation
2
Wall Mounting
This product must be installed on the wall considering appropriate environments described in previous pages.
Follow the mounting instruction described below exactly and securely.
A
Disassemble the lower wall bracket from the
product.
B
Place the upper wall bracket on a wall where
meets every installation conditions and
clearance.
And indicate the positions to drill using a pencil
or the like. And drill holes on the indicated
positions.
WARNING
It is important to ensure the drilling locations
are not located on any electrical wiring within
the wall.
NOTE
When attaching the wall bracket to a wall,
adjust the horizontal level using inclinometer.
C
Fix the upper wall bracket with screws and
anchors.
NOTE
y
Before ixing the bracket screws, check
the horizontal level once again using
inclinometer.
y
Depending on the surface, different screws
and anchors may be required for installing
the wall bracket. Therefore, these screws
and anchors are not content of the product.
The system installer is responsible for
selecting the proper screws and anchors.
y
It is recommended to use stainless steel
screws with diameter of 6-8 mm.
