LG DLEX89 0 Series Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 64

background image

7

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

• Do not put living animals such as pets inside the appliance.
• Do not put any part of your body, such as your hands or feet, or metal objects under the appliance.
• Do not let your hand get pinched when opening or closing the dryer door.

Maintenance

• Do not repair or replace any part of the appliance. All repairs and servicing must be performed by

qualified service personnel unless specifically recommended in this Owner’s Manual. Use only

authorized factory parts

• Do not disassemble or repair the appliance by yourself.
• Remove any dust or foreign matter from the power plug pins.
• Disconnect this appliance from the power supply before cleaning and attempting any user maintenance.

Turning the controls to the OFF position does not disconnect this appliance from the power supply.

• Remove the door before the appliance is removed from service or discarded to avoid the danger of

children or small animals getting trapped inside.

• Unplug the appliance before cleaning to avoid the risk of electric shock.
• The interior of the appliance and exhaust duct should be cleaned periodically by qualified service

personnel.

• Certain internal parts are intentionally not grounded and may present a risk of electronic shock only

during servicing. Service personnel - do not contact the following parts while the appliance is energized:

CONTROL BOARD

Steam

• Do not open the dryer door during a STEAM CYCLE.
• Do not touch the steam nozzle in the drum during or after a STEAM CYCLE.
• On models with a steam feeder tank, do not fill the steam feeder with hot water (over 86

℉

/ 30

℃

),

gasoline, dry cleaning solvents, or other flammable or explosive substances.

Grounding Instructions

• Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check

with a qualified electrician or service personnel if you are in doubt whether the appliance is properly

grounded. Do not modify the plug provided with the appliance; if it will not fit the outlet, have a proper

outlet installed by a qualified electrician.

• The appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the

risk of electric shock by providing a path of least resistance for electric current. The appliance is

equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must

be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes

and ordinances.

• The appliance must be plugged into a properly grounded outlet. Electrical shock may result if the

appliance is not properly grounded. Have the wall outlet and circuit checked by a qualified electrician to

make sure the outlet is properly grounded. Failure to follow these instructions may create an electric

shock hazard and/or a fire hazard.

CAUTION STATEMENTS

CAUTION

• To reduce the risk of minor or moderate injury to persons, malfunction, or damage to the product or

property when using this product, follow basic precautions, including the following:

«
...
5
6
7
8
9
...
»

Содержание DLEX89 0 Series

































































Отзывы:

Нет отзывов

Похожие инструкции для DLEX89 0 Series

Бренд: GE Страницы: 7

Бренд: GE Страницы: 1

Бренд: GE Страницы: 3

Бренд: GE Страницы: 36

Бренд: GE Страницы: 16

Spacemaker DSXH47

Бренд: GE Страницы: 48

Profile DPVH880EJ

Бренд: GE Страницы: 4

Бренд: GE Страницы: 8

Бренд: Livoo Страницы: 9

Бренд: Linea 2000 Страницы: 50

Бренд: World Dryer Страницы: 5

Бренд: NEFF Страницы: 32

DNH D8513AX-AUS

Бренд: Hoover Страницы: 15

Centauro ICL2040 Series

Бренд: mabe Страницы: 138

DVE50R5400 Series

Бренд: Samung Страницы: 120

Бренд: Maxwell Страницы: 64

Бренд: MO-EL Страницы: 24

Бренд: Magic Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды