LG DLE7300VE/00 Скачать руководство пользователя

Страница: 38 / 51

TROUBLESHOOTING

TROUBLEShOOTINg

FAQs: Frequently Asked Questions

When I press a button, why does my dryer beep and then nothing happens?

The Control Lock feature is turned on. To turn off Control Lock, turn the dryer on, then press and hold

the button that has *Control Lock on or under it for 3 seconds.

Why does my dryer take so long to dry clothes?

Proper airflow is critical to the efficient operation of clothes dryers. A lint filter which is full of lint or

clogged with fabric softener sheet residue can reduce the airflow to the point that the time required

to dry clothing will be greatly increased. Another factor affecting dry time is your home exhaust

system. An exhaust system which is dirty and clogged with lint, or is excessively long, needs to be

professionally cleaned or repaired.

Why does my dryer start by itself every few minutes?

This is how the Wrinkle Care feature works. The dryer runs briefly every few minutes for up to 3 hours

after the cycle finishes. This feature is designed to help prevent wrinkles from setting in when the

dryer is not unloaded immediately after the cycle is finished.

Why does my dryer show 3 minutes when I select the Steam Fresh™ cycle?

When the Steam Fresh™ cycle is selected, the dryer displays the number of garments rather than the

estimated cycle time, until the cycle is started. Use the More Time or Less Time buttons to adjust the

load size setting for the number of garments you desire. For a large load or single bulky item use the

(big) setting.

User Support Videos

For further assistance, there are videos and tutorials

available through the LG.com website.

On the lg.com/us home page, click on the Support

menu tab to bring up the menu selections. Select

Video Tutorials

Select Appliances and Dryers in the search menu

on the new page.

Содержание DLE7300VE/00




















































Результаты поиска

Содержание DLE7300VE/00

Отзывы:

Похожие инструкции для DLE7300VE/00

Бренды по названию

Популярные бренды

LG DLE7300VE/00, Руководство пользователя

Результаты поиска

Содержание DLE7300VE/00

Отзывы:

Похожие инструкции для DLE7300VE/00

Бренды по названию

Популярные бренды