LG DLE7300VE/00 Скачать руководство пользователя

Страница: 25 / 51

OPERATION

ENGLISH

Check the Lint Filter Before

Every Load

Always make sure the lint filter is clean before starting

a new load; a clogged lint filter will increase drying

time. To clean, pull the lint filter straight up and roll

any lint off the filter with your fingers. Do not rinse or

wash the filter to remove lint. Push the lint filter firmly

back into place. See

Regular Cleaning

for more

information.
Always ensure the lint filter is properly installed before

running the dryer. Running the dryer with a loose or

missing lint filter will damage the dryer and articles in

the dryer.

Lint Filter

Sorting Loads

Fabric Care Labels

Most articles of clothing feature fabric care labels that

include instructions for proper care.

Fabric Care Labels

Heat setting

High

Medium

Low

No heat/air

Tumble dry

Dry

Normal

Permanent Press/

wrinkle resistant

Gentle/

delicate

Do not

tumble dry

Do not dry

(used with do not wash)

group Similar Items

For best results, sort clothes into loads that can be

dried with the same drying cycle.
Different fabrics have different care requirements, and

some fabrics will dry more quickly than others. For

best fabric care results, always dry fabrics with similar

care requirements together.

Loading the Dryer

WARNINg

To reduce the risk of fire, electric shock, or

injury to persons when using this appliance,

follow basic precautions, including the

following:

•

Check all pockets to make sure that they are

empty. Items such as clips, pens, coins, and

keys can damage both your dryer and your

clothes. Flammable objects such as lighters

or matches could ignite, causing a fire.

Failure to do so may result in fire, explosion, or

death.

•

Never dry clothes that have been exposed

to oil, gasoline, or other flammable

substances. Washing clothes will not

completely remove oil residues.

Failure to

obey this warning may result in fire, explosion,

or death.

NOTE

Loading Tips

•

Combine large and small items in the same

load.

•

Damp clothes will expand as they dry. Do not

overload the dryer; clothes require room to

tumble and dry properly.

•

Close zippers, hooks, and drawstrings to

prevent these items from snagging or tangling

on other clothes.

Содержание DLE7300VE/00




















































Результаты поиска

Содержание DLE7300VE/00

Отзывы:

Похожие инструкции для DLE7300VE/00

Бренды по названию

Популярные бренды

LG DLE7300VE/00, Руководство пользователя

Результаты поиска

Содержание DLE7300VE/00

Отзывы:

Похожие инструкции для DLE7300VE/00

Бренды по названию

Популярные бренды