LG DLE7300VE/00 Скачать руководство пользователя

Страница: 4 / 51

SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

Your safety and the safety of others is very important.

We have provided many important safety messages in this manual and on your appliance. Always read and

obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word DANGER, WARNING, or

CAUTION.

These words mean:

DANgER

- You will be killed or seriously injured if you do not immediately follow instructions.

WARNINg

- You may be killed or seriously injured if you do not follow instructions.

CAUTION

- You may be slightly injured or cause damage to the product if you do not follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury,

and tell you what may happen if the instructions are not followed.

WARNINg – Risk of Fire

Install the clothes dryer according to the manufacturer’s instructions and local codes.

•

Do not install a clothes dryer with flexible plastic venting materials. If flexible metal (foil type) duct is installed,

it must be of a specific type identified by the appliance manufacturer as suitable for use with clothes dryers.

Flexible venting materials are known to collapse, be easily crushed, and trap lint. These conditions will obstruct

clothes dryer airflow and increase the risk of fire.

•

To reduce the risk of severe injury or death, follow all installation instructions.

•

Save these instructions.

WARNINg

FIRE OR EXPLOSION hAZARD

Failure to follow safety warnings exactly could result in serious injury, death or property damage.
—Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other

appliance.
—WHAT TO DO IF YOU SMELL GAS

•

Do not try to light any appliance.

•

Do not touch any electrical switch; do not use any phone in your building.

•

Clear the room, building or area of all occupants.

•

Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

•

If you cannot reach your gas supplier, call the fire department.

—Installation and service must be performed by a qualified installer, service agency or the gas supplier.

Содержание DLE7300VE/00




















































Результаты поиска

Содержание DLE7300VE/00

Отзывы:

Похожие инструкции для DLE7300VE/00

Бренды по названию

Популярные бренды

LG DLE7300VE/00, Руководство пользователя

Результаты поиска

Содержание DLE7300VE/00

Отзывы:

Похожие инструкции для DLE7300VE/00

Бренды по названию

Популярные бренды