LG DL X670 Series Скачать руководство пользователя страница 47

Страница: 47 / 64

SMART FUNCTIONS

ENGLISH

instructions, may cause harmful interference to

radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to

try to correct the interference by one or more of

the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment

and the receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV

technician for help.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two

conditions:
(1) This device may not cause harmful interference

and
(2) This device must accept any interference

received, including interference that may cause

undesired operation.
Any changes or modifications in construction of

this device which are not expressly approved by

the party responsible for compliance could void

the user’s authority to operate the equipment.

FCC RF Radiation Exposure

Statement

This equipment complies with FCC radiation

exposure limits set forth for an uncontrolled

environment. This transmitter must not be co-

located or operating in conjunction with any other

antenna or transmitter.
This equipment should be installed and operated

with a minimum distance of 20 cm (7.8 inches)

between the antenna and your body. Users must

follow the specific operating instructions for

satisfying RF exposure compliance.

Open Source Software Notice

Information

To obtain the source code that is contained in this

product, under GPL, LGPL, MPL, and other open

source licenses that have the obligation to disclose

source code, and to access all referred license

terms, copyright notices and other relevant

documents, please visit https://

opensource.lge.com.

LG Electronics will also provide open source code

to you on CD-ROM for a charge covering the cost

of performing such distribution (such as the cost of

media, shipping, and handling) upon email

request to [email protected].
This offer is valid to anyone in receipt of this

information for a period of three years after our

last shipment of this product.

Smart Diagnosis

Function

Use this feature to help you diagnose and solve

problems with your appliance.

NOTE

• For reasons not attributable to LGE’s negligence,

the service may not operate due to external

factors such as, but not limited to, Wi-Fi

unavailability, Wi-Fi disconnection, local app

store policy, or app unavailability.

• The feature may be subject to change without

prior notice and may have a different form

depending on where you are located.

Using LG ThinQ to Diagnose Issues

If you experience a problem with your Wi-Fi

equipped appliance, it can transmit

troubleshooting data to a smartphone using the

LG ThinQ

application.

• Launch the

LG ThinQ

application and select the

Smart Diagnosis

feature in the menu. Follow

the instructions provided in the

LG ThinQ

application.

Using Audible Diagnosis to

Diagnose Issues

Follow the instructions below to use the audible

diagnosis method.
• Launch the

LG ThinQ

application and select the

Smart Diagnosis

feature in the menu. Follow

the instructions for audible diagnosis provided

in the

LG ThinQ

application.

Press the

Power

button to turn on the

appliance.

Press the

Options

button.

Turn the knob to select

Additional Settings

and press the

(

) button.

Содержание DL X670 Series

































































Результаты поиска

Содержание DL X670 Series

Отзывы:

Похожие инструкции для DL X670 Series

Бренды по названию

Популярные бренды

LG DL X670 Series, Руководство пользователя

Результаты поиска

Содержание DL X670 Series

Отзывы:

Похожие инструкции для DL X670 Series

Бренды по названию

Популярные бренды