LG DL X670 Series Скачать руководство пользователя страница 30

Страница: 30 / 64

OPERATION

OPERATION

Before Use

WARNING

• To reduce the risk of fire, electric shock, or injury to persons, read the

IMPORTANT SAFETY

INSTRUCTIONS

before operating this appliance.

Operation Overview

Clean the Lint Filter
• If the lint filter has not already been

cleaned, lift out the filter and remove the

lint from the last load. This will help ensure

the fastest and most efficient drying

performance. Make sure to reinstall the

filter, pressing down until it clicks firmly into

place.

Load the Dryer
• Make sure that clothing is pushed entirely

into the drum and away from the door seal

area. Clothing that gets stuck between the

door and seal may be damaged or damage

the seal.

• If the load is extra large, you may need to

divide it into smaller loads for proper

performance and fabric care.

• All strings and attached belts of clothes

should be well tied and secured before

being put into the drum.

Turn on the Dryer
• Press the

Power

button to turn on the

dryer. The display will turn on and a chime

will sound.

Select a Cycle
• Turn the cycle selector knob until the

desired cycle is selected. The preset

temperature, dry level, and option settings

for that cycle will be shown.

Adjust Settings

Default settings for the selected cycle can now

be changed, if desired, using the cycle

modifier and option buttons.
• Not all modifiers and options are available

on all cycles.

Begin Cycle
• Press the

Start/Pause

button to begin the

cycle. The cycle can be paused at any time

either by opening the door or by pressing

the

Start/Pause

button.

• If the

Start/Pause

button is not pressed

within a certain time, the dryer shuts off

and all settings are lost.

End of Cycle
• When the cycle is finished, the chime will

sound. Immediately remove your clothing

from the dryer to reduce wrinkling. If

Wrinkle Care

is selected, the dryer will

tumble briefly every few minutes to help

prevent wrinkles from setting in the clothes.

Check the Lint Filter Before Every

Load

Always make sure the lint filter

is clean before

starting a new load; a clogged lint filter will

increase drying time. To clean, pull the lint filter

straight up and roll any lint off the filter with your

fingers. Push the lint filter firmly back into place.

See

Regular Cleaning

for more information.

Always ensure that the lint filter is properly

installed before running the dryer. Running the

dryer with a loose or missing lint filter will damage

the dryer and articles in the dryer.

Содержание DL X670 Series

































































Результаты поиска

Содержание DL X670 Series

Отзывы:

Похожие инструкции для DL X670 Series

Бренды по названию

Популярные бренды

LG DL X670 Series, Руководство пользователя

Результаты поиска

Содержание DL X670 Series

Отзывы:

Похожие инструкции для DL X670 Series

Бренды по названию

Популярные бренды