Troubleshooting ?
20
During operation, noise increases
suddenly.
• When compressor starts to operate,
( 3 minutes after turning the switch ON, or in
AUTO Mode) the noise increases.
When the unit is used first time,
there is a smell in the wind.
• As the temperature of heat exchanger
increases, temporarily a smell may be
generated.
Warm wind comes out.
• Since the air that was dehumidified by cooling
gets warm by the condenser, the airflow gets
warm. (There is no cooling function.)
The angle or operation of Louver is
abnormal.
• Press the AUTO Swing Button again.
The volume of noise changes.
• Depending on the angle of Louver, the volume
of noise changes.
During operation startup, operation
conversion, or operation stop, a
weird sound is heard in the unit.
• Until coolant circulation gets stabilized, the
sound of coolant may be heard.
Compressor will not work.
• For 3 minutes immediately after the unit is
turned off or Power Cord is plugged, the unit
will not operate to protect the compressor.
• If the relative humidity in the room gets below
the level you have selected, the Dehumidifier
will turn itself off.
There are liquid or white marks in
the bucket.
• This is the water generated in the factory test,
or the trace of water evaporation.
This is normal.
The follwing symptoms are normal
Save time and money!
Review the chart below first and you may not need
call for service.
