Troubleshooting ?
19
ENGLISH
Dehumidifier does not start when
operation buttons are pressed.
• The power cord is not pushed completely into
the outlet.
• The fuse is blown or circuit breaker is tripped.
• Bucket is not in the proper position.
• Water bucket is full.
• Defrosting is under way. (Defrosting Lamp
lights up.)
- Sensor is operating.
- If room humidity is lower than that you
selected, the operation will stop.
Humidity indicated by the unit is
different from real value.
• Humidity may differ depending on locations.
When fan noise occurs
• Floor is unstable.
• Move the Dehumidifier and after removing
the bucket, replace it.
• Air filter is clogged.
The laundry would not dry as it
should be.
• Dry air may not contact laundry.
• Area to be dehumidified is too large.
• There is too much laundry.
Operation and stop repeats
alternately.
• Humidity may be automatically controlled by
AUTO dehumiditied Mode.
Water leaks.
• The Dehumidifier may have been skewed or fallen down.
• During continuous drainage, hose connection has been
incomplete or detached.
During Operation Mode,
Dehumidifier does not dry the air as
it should.
• Doors and windows may not be closed tightly.
• Area to be dehumidified is too large.
• There may be any vapor-generating object such as
stove.
• Air purifying mode is set.
Moisture removed is small.
• Air filter is clogged or usage period(about 5
months) has passed.
• Air purifying mode is set.
• Temperature and humidity in the room are low.
• Air inlet or air outlet is clogged.
Conditions
Check the following points
Save time and money!
Review the chart below first and you may not need
call for service.
