LG CodePlus PIVD100R Скачать руководство пользователя

Страница: 68 / 69

206-4202

The following GPL executables and LGPL libraries used in this

product are subject to the GPL Version 2.0/LGPL Version 2.1

License Agreements:

GPL EXECUTABLES:

Linux kernel 2.6.33, LTIB 10.1.1,

bash-2.05b, busybox-1.1.3, e2fsprogs-1.34, ethtool-3, gawk-

3.1.3, lrzsz_0.12.21, lzo-2.03, mtd-utils-1.2.0, net-tools-1.60,

ntpclient_2003_194, openvpn-2.1.1, pciutils-2.1.11, ppp-2.4.1,

procps-3.1.11, screen-4.0.2-1, skell-1.13, time-1.7

LGPL LIBRARIES:

eglibc 2.8, libelf-0.8.5, termcap-2.0.8

To obtain the source code under GPL, LGPL, MPL and other

open source licenses that are contained in this product, please

visit http://opensource.lge.com. In addition to the source code,

all referenced license terms, warranty disclaimers and copy-

right notices are available for download. LG Electronics

will also provide open source code to you on CD-ROM for a

charge covering the cost of performing such distribution (such

as the cost of media, shipping and handling) upon e-mail

request to [email protected]. This offer is valid for three (3)

years from the date on which you purchased the product.
You can obtain a copy of the GPL, LGPL licenses from: http://

www.gnu.org/licenses/old-licenses/gpl-2.0.html and http://

www.gnu.org/licenses/oldlicenses/lgpl-2.1.html.
This product includes:

• OpenSSH-4.3p2:

tina

1995 The Regents of the University of California

Friedl

Damien Miller

tium

tion

chines, Inc.

• OpenSSL-1.0.0:

obtaining a copy of this software and associated documen-

tation files (the “Software”), to deal in the Software without

restriction, including without limitation the rights to use, copy,

modify, merge, publish, distribute, sublicense, and/or sell cop-

ies of the Software, and to permit persons to whom the Soft-

ware is furnished to do so, subject to the following conditions:
SUBJECT TO THE TERMS OF THE GPL VERSION 2.0/LGPL

VERSION 2.1 LICENSE AGREEMENTS, THE SOFTWARE IS

PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO

THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR

A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN

NO EVENT SHALL THE AUTHORS, COPYRIGHT HOLDERS,

OR LG ELECTRONICS (THE “LICENSOR”) BE LIABLE FOR

ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER

IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,

ARISING FROM, OUT OF OR IN CONNECTION WITH THE

SOFTWARE OR THE USE OR OTHER DEALINGS IN THE

SOFTWARE, EVEN IF LICENSOR HAS BEEN ADVISED

OF THE POSSIBILITY OF SUCH DAMAGES. LICENSEE

ASSUMES THE COST OF ALL NECESSARY SERVICING,

REPAIR, OR CORRECTION.

Open Source Software Notice

Содержание CodePlus PIVD100R





































































Результаты поиска

Содержание CodePlus PIVD100R

Отзывы:

Похожие инструкции для CodePlus PIVD100R

Бренды по названию

Популярные бренды

LG CodePlus PIVD100R, Инструкция по установке и настройке

Результаты поиска

Содержание CodePlus PIVD100R

Отзывы:

Похожие инструкции для CodePlus PIVD100R

Бренды по названию

Популярные бренды