53
206-4218
Configuration Options via Command Line (Cont.)
(Continued from previous page)
2. Either:
• Continue with step 3 for information on modifying the IP configuration of the Control Port.
• Go to step 8 for information on modifying the DNS configuration.
• To exit the Network Configuration Menu without modifying any settings, type
exit
at the
Network Configuration Menu
>
prompt.
3. Type
ip
and press
Enter
to modify the configuration of the Control Port.
4. At the
Host name [oat100r]:
prompt, either press
Enter
to accept the default value in
square brackets, or type a new host name and then press
Enter
.
5. At the
Using DHCP (Y/N) [Y]:
prompt, type
y
if the OAT100R uses DHCP, or type
n
to
specify the network IP addresses. Then, press
Enter
.
6. If the OAT100R is NOT using DHCP, type the information requested at each of the following
prompts. Press
Enter
after each entry.
This host IP address []:
(Type the host IP address in the format xxx.xxx.xxx.xxx.)
Network mask []:
(Type the netmask in the format xxx.xxx.xxx.xxx.)
Gateway IP address []:
(Type the IP address of the default gateway in the format xxx.xxx.xxx.xxx.)
7. Once you enter the gateway IP address, the system will redisplay the Network Configuration
Menu.
• To modify the DNS configuration, continue with step 8.
• If no additional network configuration is required, go to step 9.
8. To change the DNS configuration, type
dns
and press
Enter
.
At each of the following prompts, type the information requested. Press
Enter
after each
entry.
Configuring DNS
Primary DNS IP address []:
Secondary DNS IP address []:
Once you enter the secondary DNS IP address, the system will redisplay the Network
Configuration Menu. You can select another option to modify (see previous steps) or you
can exit as described below.
9. When you are finished with network configuration, type
exit
at the Network Configuration
Menu
>
prompt. The system will display an overview of the new network configuration
and then prompt for confirmation to save the changes, for example:
(Continued on next page)
