background image

8

206-4180

Typical DISH Network HD Transcoder System Overview

The LG HCS7720 DISH Network HD transcoder represents a single-program MPEG-4 to 

MPEG-2 HDTV solution for commercial and institutional MATV systems (hotels, hospitals, 

etc.). 

A typical DISH Network HD Transcoder System includes:

•  One HCS7720 DISH Network HD transcoder card for each HD program offered in the  

facility’s MATV system.

•  A CodePlus series card frame (Example: HCS6150R) specified for the HCS7720.
•  A DISH Network 3-LNB dish antenna system, required for MPEG-4 support and reception. *
•  A DISH Network ViP  222k satellite receiver for each transcoder card. (Note that ViP 222 

satellite receivers are not supported with HCS7720 transcoder cards.) *

•  A QAM or VSB modulator with ASI input for each transcoder or an LG CodePlus series 

HCS6320 MUX/MOD feature card. Multiplexers can be used in front of the modulator if 

multiple programs are desired and 256-QAM is used. *

•  (For each modulator, if applicable) An upconverter compatible with digital modulation. *
•  A 19-inch rack for mounting. *
•  Miscellaneous cables and installation hardware (see also setup information on page 6). *

The integrated elements of the DISH Network HD Transcoder System:

•  Receive a selected HD program from DISH Network service.
•  Transcode the received digital video and audio stream to an MPEG-2 compatible transport 

stream.

•  Encrypt the transcoded digital data stream.
•  Modulate the stream in QAM or VSB.
•  Upconvert the modulated, encrypted transport stream to an RF channel.

A Pro:Idiom compatible television with a QAM/VSB tuner is required to view premium HD  

content. The HCS7720 converts the DISH Network encryption to Pro:Idiom encryption; thus,  

a proper session ID must be set at the TV in order for Pro:Idiom decryption to be enabled. 

LG’s Pay-Per-View (PPV) partners can set up this session through their interface. LG’s 

Free-To-Guest (FTG) Mode of operation also enables Pro:Idiom decryption.

Note:

 The RF output from the Transcoder System can be combined with other channels in 

the site’s distribution grid. 

Transcoder Product Description

* Purchased separately.

Note: Design and specifications subject to change without prior notice.

Содержание CodePlus HCS7720 Series





























Отзывы: