background image

206-4180

3

Important safeguards for you and your new product

THIS PRODUCT HAS BEEN MANUFACTURED AND TESTED WITH SAFETY IN MIND. 

IMPROPER USE, HOWEVER, CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR 

FIRE HAZARDS. TO AVOID DEFEATING THE SAFEGUARDS THAT HAVE BEEN BUILT 

INTO THIS PRODUCT, PLEASE READ AND OBSERVE THE FOLLOWING SAFETY 

POINTS WHEN INSTALLING AND USING THIS PRODUCT.

(Continued on next page)

1.  Read these instructions.

 

Read all the safety and operating instructions 

before operating the product.

2.  Keep these instructions.

  Retain the safety and operating instructions 

for future reference.

3.  Heed all warnings.

  Adhere to all warnings on the product and in 

the operating instructions.

4.  Follow all instructions.

  Follow all operating and use instructions.

5.  Do not use this apparatus near water.

  Do not use this product near water or moisture 

or in an area, such as a basement, that might 

become flooded. 

6.  Clean only with dry cloth. 

  Unplug this product before cleaning. Do not 

use liquid cleaners or aerosol cleaners. 

7.  Refer all servicing to qualified service  

personnel.  

Servicing is required when the apparatus has 

been damaged in any way, liquid has been 

spilled or objects have fallen into the appara-

tus, the apparatus has been exposed to rain 

or moisture, does not operate normally, or has 

been dropped.

8. Object and Liquid Entry

Never push objects of any kind into this  

product through openings as they may touch 

dangerous voltage points or short-out parts 

that could result in a fire or electric shock. 

Never spill liquid of any kind on the product.

9.  Outdoor Use

Warning: To prevent fire or shock 

hazards, do not expose this product 

to rain or moisture.

10. Wet Location

 

The apparatus shall not be exposed to drip-

ping or splashing and no objects filled with 

liquids, such as vases, shall be placed on 

the apparatus.

11. Test Equipment 

In some cases, LG has supplied or recom-

mended the use of test equipment and 

devices for the setup and testing of the 

equipment. The operation and maintenance 

of test equipment is described in their  

associated instruction manuals. Please refer 

to these manuals for explicit instructions 

regarding the safe use and handling of the 

equipment.

12. Damage Requiring Service 

Unplug this product from the wall power  

outlet and refer servicing to qualified service 

personnel under the following conditions:

a. If liquid has been spilled, or objects have 

fallen into the product.

b. If the product has been exposed to rain or  

water.

c. If the product does not operate normally by 

following the operating instructions. Adjust 

only those controls that are covered by the 

operating instructions, as an improper 

adjustment of other controls may result in 

damage and will often require extensive 

work by a qualified technician to restore 

the product to its normal operation.

IMPORTANT SAFETY INSTRUCTIONS

Содержание CodePlus HCS7720 Series





























Отзывы: