LG CM9520 Скачать руководство пользователя страница 36

Страница: 36 / 109

3-7

Does the customer select correctly

the CD function he or she wants to listen to?

Make sure to put on a CD disc on the tray.

YES

Is a CD disc put on the tray correctly?

Make sure to insert the CD disc upside down.

YES

Does the unit display “NO DISC” on VFD

when a disc is inserted on the tray?

Place the disc with the label

or printed side facing upwards.

YES

Does the customer use

the supported mp3 or WMA music files on the disc?

Check the playable disc.

Make sure that the file extensions

are “.mp3” or “.wma”.

YES

When the unit searches music files in a CD disc,

are the following messages displayed on VFD?

“SELECTED” “TRACKING #” and “TIME”

Make sure to check

the supported MP3/WMA music file on the CD disc.

Refer to the owner’s manual.

YES

After selecting a track number using the SCAN or

DISC# button, press PLAY button and turn the master

volume clockwise for the volume up.

The volume level LEDs around the master volume

will be turned on more and more

while turning it clockwise for the volume up.

YES

Is the sound quality good to listen to the music?

Make sure to clean CD discs with a commercially

available cleaner. If the surface of the disc is polluted

or scratched, the sound quality can become bad

or the customer can not listen to the music.

YES

Are the sound spectrum level LED’s

on the left and right side of the front panel

changed up and down

according to the sound input gain?

The sound spectrum level LED’s will be turned on/off

repeatedly at regular intervals. A speaker cable

might be short-circuited with the chassis ground.

Be careful not to be shorted each other.

6. NO SOUND IN CD FUNCTION

TRAINING MASTER

Содержание CM9520














































































































Результаты поиска

Содержание CM9520

Отзывы:

Похожие инструкции для CM9520

Бренды по названию

Популярные бренды

LG CM9520, Руководство по обслуживанию

Результаты поиска

Содержание CM9520

Отзывы:

Похожие инструкции для CM9520

Бренды по названию

Популярные бренды