LG AS-W306MMH0 Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 78

background image

- 36 -

Copyright ©2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes

LGE Internal Use Only

Operation

Airflow Speed Selection

On-Timer Operation

Off-Timer Operation

Off-Timer <=> On-Timer Operation

Sleep Timer Operation

Chaos Swing Mode

• The airflow speed of the indoor fan is set to high, medium, low, or power (auto) by the input of the airflow

speed selection key on the remote control.

• When the set time is reached after the time is input by the remote control, the appliance starts to operate.
• The timer LED is on when the on-timer is input. It is off when the time set by the timer is reached.
• If the appliance is operating at the time set by the timer, the operation continues.
While in Fuzzy operation, the airflow speed of the indoor fan is automatically selected according to the temperature.

• When the set time is reached after the time is input by the remote control, the appliance stops operating.
• The timer LED is on when the off-timer is input. It is off when the time set by the timer is reached.
• If the appliance is on pause at the time set by the timer, the pause continues.

• When the set time is reached after the on/off time is input by the remote control, the on/off-timer operation is

carried out according to the set time.

• When the sleep time is reached after <1,2,3,4,5,6,7,0(cancel) hr> is input by the remote control while in appli-

ance operation, the operation of the appliance stops.

• While the appliance is on pause, the sleep timer mode cannot be input.
• While in cooling mode operation, 30 min later since the start of the sleep timer, the setting temperature

increases by 1°C. After another 30 min elapse, it increases by 1°C again.

• When the sleep timer mode is input while in cooling cycle mode, the airflow speed of the indoor fan is set to

the low.

• When the sleep timer mode is input while in heating cycle mode, the airflow speed of the indoor fan is set to

the medium.

• By the Chaos Swing key input, the upper/lower vane automatically operates with the Chaos Swing or they are

fixed to the desired direction.

• While in Chaos Swing mode, the angles of cooling and heating cycle operations are different.

«
...
34
35
36
37
38
...
»

Содержание AS-W306MMH0















































































Отзывы:

Нет отзывов

Похожие инструкции для AS-W306MMH0

Бренд: GE Страницы: 20

Бренд: GE Страницы: 68

Бренд: Shinco Страницы: 13

AIRPUR PAP 650V

Бренд: S&P Страницы: 13

Бренд: Daikin Страницы: 15

Бренд: Elba Страницы: 20

Бренд: Impecca Страницы: 44

CoolAir CA-1000-AC

Бренд: Waeco Страницы: 220

Бренд: ionmax Страницы: 16

SDH 17-050 M2NW

Бренд: Saunier Duval Страницы: 80

Бренд: Uberhaus Страницы: 30

Fellini 13-04540

Бренд: Sunrise Tradex Страницы: 18

Бренд: Oceanic Страницы: 67

Бренд: Aerial Страницы: 32

Бренд: EINHELL Страницы: 88

Бренд: Eurapo Страницы: 88

Бренд: interzon Страницы: 12

Бренд: Daikin Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды