Service Manual 29
Installation
1. Open panel front
■
First,Pull the grille bottom, then remove screws(2
pieces), and close grille bottom again.
■
The moment of lifting the both lower parts of panel
front, you can hear sound this panel came out, In
this time panel front is separated
■
After pull down this panel a bit, and separate con-
necting wire with product.
Pipe hole
Side cover
Panel Front
Connector
2. Cover pipe and cover side remove
■
Remove two screws(for fixing cover pipe)
■
Pull up the cover side of desired connecting direc-
tion, then cover side is separated.
■
In case connecting direction is left or right, path
through the hole of cover side.
When connecting pipe path through rear wall, don’t
remove the hole.
3. Drain hose junction
■
Remove the rubber stopple of desired drain direc-
tion.
■
As the following picture, Insert drain hose in the
handle of drain pan, and join drain hose and con-
necting hose.
rubber cap
Only one
desiring direction
Connecting
part
Adhesive
Drain
hose
3) Preparing work for Installation
After removing the pipe hole, cut the burr for safety.
CAUTION
Содержание ARTCOOL LA180CP
