LG ART COOL LA090HSV5 Скачать руководство пользователя страница 68

Страница: 68 / 74

Single Zone

Art Cool

Mirror W

all Mount Installation Manual

Due to our policy of continuous product innovation, some specifications may change without notification.

TROUBLESHOOTING

LG SIMS - Self Diagnosis Functions

The SIMs WLAN module and the smart phone app together provide monitoring and

troubleshooting capability for LG Duct Free Systems. SIMs function only with LG Duct

Free products. LG SIMs can also be used with Single Zone one-to-one configurations

such as the Single Zone Wall Mount systems.
SIMs app is available for Apple

iPhone

iOS or Android™ smart phone operating sys-

tems. Download the latest version from the App Store (iPhone iOS) or Google Play™

store (Android). (Apple and iPhone are trademarks of Apple Inc., registered in the U.S.

and other countries. Android and Google Play store are trademarks of Google LLC.
SIMs can display and graph operational data for the air conditioner system including

the indoor unit and the outdoor unit. SIMs also displays error codes and a trouble-

shooting guide. A full copy of the LG SIMs Smart Inverter Monitoring System User’s

Manual is available on the www.lghvac.com website.
To use SIMs, you must be a trained HVAC service technician familiar with variable

refrigerant flow (VRF) systems in general, and with LG’s Duct Free System products.

You must understand the inverter air conditioning operation cycle, the meaning of the

data displayed by SIMs, and how to use the data to troubleshoot the system.

•

The Duct Free System air conditioning system must

run for at least 15–20 minutes before data collected

by SIMs is valid for troubleshooting.

•

The free SIMs app must be correctly installed on

the smart phone before using SIMs.

•

Some outdoor units have an LGMV extension cable

accessed by removing the side handle cover. If the

outdoor unit does not have this extension cable,

access the LGMV connector by removing the top

cover of the outdoor unit.

High voltages capable of causing death are used

in this equipment. Outdoor unit power remains con-

nected during this procedure. Take extreme caution

not to touch electrical components or connections.

Failure to observe this warning can result in death

or severe injury.

Figure 119: LG SIMs App and WLAN Module.

Figure 120: SIMs WLAN Module to DFS System Example.

Figure 121: SIMs App Main Info Screen

SIMs App Main Info Screen

The main screen is the first screen displayed after wireless connec-

tion is established. Tap the Main Info tab to display current readings

regarding the indoor and outdoor unit(s). The Operational Info area

of the screen will show active functions or modes by illuminating the

light to the right of the function.
Additional Help information can be accessed by tapping the Help

Menu buttons at the bottom of this screen.

Operational

Information

AC Cycle

Information on

Main Info Tab

Help Menu

(File is Factory Use Only)

LG SIMs

WLAN Module

LG SIMs App

on Smart Phone

Содержание ART COOL LA090HSV5











































































Результаты поиска

Содержание ART COOL LA090HSV5

Отзывы:

Похожие инструкции для ART COOL LA090HSV5

Бренды по названию

Популярные бренды

LG ART COOL LA090HSV5, Руководство по установке

Результаты поиска

Содержание ART COOL LA090HSV5

Отзывы:

Похожие инструкции для ART COOL LA090HSV5

Бренды по названию

Популярные бренды