36
Multi V Ducted Indoor Units
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
INSTALLATION
Indoor Unit Dimensions
2. Use only LG-provided cable to connect the zone controller. Pull LG communications cable between the zone controller handy box and the
indoor unit. A thirty-three (33) foot length of cable will be found with the wall-mounted zone controller.
3. Store a minimal amount of cable in the handy box. Any additional
cable should be coiled and stored near the indoor unit control
panel.
4. If additional cable is needed, order a thirty-three (33) foot LG
Wired Remote Group Control Extension cable (Model No. PZC-
WRC1).
5. If the cable between the zone controller and the indoor unit is too
long, do not cut the cable and shorten. Coil any spare
communications cable, tie-wrap it, and leave it next to the indoor
unit location.
6. Zone controller rough-in is complete.
Chassis
Code
Weight
(lbs.)
Major Dimensions (in.)
1
Mounting Dimensions (in.)
W
D
H
L6
M1
M2
M3
M4
High-Static Ducted Indoor Units
BH
59
34-3/4
17-3/4
10-1/4
4-1/4
36-11/16
14
1
1-7/8
BG
84
46-1/2
17-3/4
11-3/4
4-1/4
48-1/2
14
1
1
BR
112
48-1/2
23-5/16
15
4-7/16
50-1/2
18-3/4
1
1
B8
192
61-5/8
27-1/8
18-1/8
4-11/16
63-7/8
22-7/8
1-3/16
1-3/16
Low-Static Ducted Indoor Units
L1
39
30-1/2
27-9/16
7-1/2
3
28-7/8
24-3/4
5/8
1-3/8
L2
51
38-3/8
27-9/16
7-1/2
3
36-3/4
24-3/4
5/8
1-3/8
L3
60
46-1/4
27-9/16
7-1/2
3
44-5/8
24-3/4
5/8
1-3/8
Low-Static Built-In Ducted Indoor Units
B3
46
32-5/8
22-5/8
7-1/2
1-7/16
33-7/16
15
5/8
3-11/16
B4
57
43-5/16
22-5/8
7-1/2
1-7/16
44-7/16
15
5/8
3-11/16
Table 14: Ducted Indoor Unit Dimensions and Weights.
Figure 9: High-Static Ducted Indoor Unit Dimensions.
M1
M2
M4
M3
L6
W
D
H
Airflow
1
Case dimensions exclude insulation. Add approximately 1/8" for factory-applied external insulation for each side. High-Static models are insulated on all sides. Low-Static models are
insulated on the bottom and end cold surfaces only between the fan discharge and midway to the rear of the unit.
Figure 10: Low-Static Ducted Indoor Unit Dimensions.
M1
M2
M4
M3
H
D
W
Airflow
M1
M2
M4
M3
H
D
W
Airflow
Figure 11: Low-Static Ducted Indoor Unit B3/B4 Dimensions.