18
Air Conditioner
Wiring Connection
8. Electrical Wiring
9. Installation of Front Panel
1. All wiring must comply with LOCAL REGULATIONS.
2. Select a power source that is capable of supplying the current required by the air conditioner.
3. Feed the power source to the unit via a distribution switch board designed for this purpose.
4. The terminal screws inside the control box may be loose due to vibration during transport.
Check the screws for loose connection.
(Running the air conditioner with loose connection can overload and damage electrical
components.)
5. Always ground the air conditioner with a grounding wire and connector to meet the LOCAL
REGULATION.
CAUTION:
• The circuit diagram is not subject to
change without notice.
• Be sure to connect wires according
to the wiring diagram.
• Connect the wires firmly, so that not
to be pulled out easily.
• Connect the wires according to
color codes by referring the wiring
diagram.
Air
Conditioner
Main power source
Circuit Breaker
1. Fit the Front Panel onto the indoor unit and push the upper area that are marked with arrows
2. Check the air sensor and install the 4 screws
3. Then assemble the front grille and put the hinges
4. Close the grille.
