ProduCT dATA | 29
Product Data
Due to our policy of continuous product innovation, some specifications may change without notification.
aCCESSoriES
•
Actual inverter compressor speed
•
Target inverter compressor speed
•
Actual outdoor fan speed
•
Target outdoor unit fan speed
•
Actual superheat
•
Inverter compressor current value
•
outdoor air temperature
•
Actual high pressure/saturation temperature
•
Actual low pressure/saturation temperature
•
Suction temperature
•
Inverter compressor discharge temperature
•
outdoor coil pipe temperature
•
Liquid line pipe temperature
•
Inverter compressor operation indicator light
•
Four-way reversing valve operation
indicator light
•
Pressure graph showing actual low pres-
sure and actual high pressure levels
•
Error code display
•
operating mode indicator
•
Total number of connected indoor units (for
multi zone systems)
•
Communication indicator lights
•
Unit error code
•
Indoor unit capacity
•
Indoor unit operating mode
•
Indoor unit fan speed
•
Indoor unit room temperature
•
Indoor unit inlet pipe temperature
•
Indoor unit outlet pipe temperature
lg Monitoring view (lgMv) diagnostic Software and Cable
LGMV software allows the service technician or commissioning agent to connect a computer
USB port to the outdoor unit main printed circuit board (PCB) using an accessory cable with-
out the need for a separate interface device. The main screen for LGMV allows the user to
view the following real time data on one screen:
Additional information that can be gathered from the main screen:
1. Graph: Graphic shows the following:
•
Compressors showing actual speeds
•
EEVs
•
IDUs
•
Low and high pressures
•
Temperature sensors
•
Four-way reversing valve
•
outdoor fans showing status and speeds
2. Setting: Converts metric values to imperial values.
3. Making Data: Recording of real time data to a separate file created to be stored on the
user’s computer.
4. Loading Data: Recorded data from a saved “.CSV” file can be loaded to create an
LGMV session.
5. Electrical Data: The lower half of main screen is changed to show the following:
Figure 5: MV Diagnostic Screen
•
Inverter compressor
- Amps
- Volts
- Power Hz
- Inverter control board fan Hz