LG A2UW146FA0 Скачать руководство пользователя страница 9

Страница: 9 / 254

- 9 -

LGE Internal Use Only

Safety Precautions

Do not open the inlet grill of the product
during operation. (Do not touch the elec-
trostatic filter, if the unit is so equipped.)

• There is risk of physical injury,

electric shock, or product failure.

When the product is soaked
(flooded or submerged), contact
an Authorized Service Center.

• There is risk of fire or electric

shock.

Be cautious that water could
not enter the product.

• There is risk of fire, electric shock,

or product damage.

Ventilate the product from time to time when
operating it together with a stove, etc.

• There is risk of fire or electric shock.

Turn the main power off when cleaning or
maintaining the product.

• There is risk of electric shock.

When the product is not be used for a long time, dis-
connect the power supply plug or turn off the breaker.

• There is risk of product damage or failure, or unintend-

ed operation.

Take care to ensure that nobody could step on
or fall onto the outdoor unit.

• This could result in personal injury and product dam-

age.

Always check for gas (refrigerant) leak-
age after installation or repair of product.

• Low refrigerant levels may cause

failure of product.

Install the drain hose to ensure that
water is drained away properly.

• A bad connection may cause water

leakage.

Keep level even when
installing the product.

• To avoid vibration or water leak-

age.

CAUTION

■

Installation

Содержание A2UW146FA0

















































































































































































































































Результаты поиска

Содержание A2UW146FA0

Отзывы:

Похожие инструкции для A2UW146FA0

Бренды по названию

Популярные бренды

LG A2UW146FA0, Руководства

Результаты поиска

Содержание A2UW146FA0

Отзывы:

Похожие инструкции для A2UW146FA0

Бренды по названию

Популярные бренды