GB-8
EXTERNAL
EQUIPMENT SETUP
EXtERnAl EQuIPmEnt SEtuP
Connecting with a Euro Scart Cable
➊
Connect the Euro scart socket of the DVD to the
AV1
Euro scart socket on the
TV.
➋
Turn on the DVD player, insert a DVD.
➌
Select
AV1
input source using the
INPUT
button on the remote control.
If connected to
AV2
Euro scart socket, select
AV2
input source.
➍
Refer to the DVD player’s manual for operating instructions.
NOTE
Any Euro scart cable used must be signal shielded.
Copy-protected programmes will not be output on the EURO scart sockets for
legal reasons. Even if it was output, the video signals fed through the EURO
scart sockets will be not recorded by copyright protection systems.
Scart Output
Main Input
AV1 (SCART1 Output)
AV2 (SCART2 Output)
Digital TV
Mute
Digital TV
Analogue TV
Mute
(Analogue TV if the TV mode you last
watched is Analogue mode.)
Analogue TV
AV1 (SCART1)
CVBS
AV1 (CVBS)
RGB
AV2 (SCART2)
CVBS
AV2 (CVBS)
Component
Mute
RGB
Mute
AV3(CVBS)
AV3 (CVBS)
HDMI
Mute
HDMI2
Mute
HDMI3
Mute
HDMI4 (Only 32/42LF73**)
Mute
Connecting the HdmI Cable
➊
Connect the HDMI output of the DVD to the
HDMI/DVI IN 1, HDMI IN 2
,
HDMI IN 3
or
HDMI IN 4
(Only 32/42LF73**) jack on the TV.
➋
Select
HDMI
,
HDMI2
,
HDMI3
or
HDMI4
(Only 32/42LF73**) input source
using the
INPUT
button on the remote control.
➌
Refer to the DVD player’s manual for operating instructions.
NOTE
The TV can receive video and audio signals simultaneously when using a
HDMI cable.
If the DVD does not support Auto HDMI, you must set the output resolution
appropriately.
Check that your HDMI cable is version 1.3 or higher. If the HDMI cables don’t
support HDMI version 1.3, flickering or no screen display can result. Please
use the latest cables that support at least HDMI version 1.3.
►
►
►
►
►
ANTENNA IN
(RGB)
2
3
1(DVI)
(R) AUDIO (L)
AUDIO/
VIDEO
ANTENNA IN
(RGB)
2
3
1(DVI)
ANTENNA IN
(RGB)
2
3
1(DVI)
➊
ANTENNA IN
(RGB)
2
3
1(DVI)
(R) AUDIO (L)
AUDIO/
VIDEO
ANTENNA IN
(RGB)
2
3
1(DVI)
ANTENNA IN
(RGB)
2
3
1(DVI)
➊
