LG-Ericsson LIP-9070, Руководство пользователя

Страница: 120 / 197

INTERNAL
LIP-9070 User guide 03/09/2013
Page 120of
13.2 Placing a call
13.2.1 Internal Calls
You can place calls to other stations in the system over the Intercom. The call will ring, or for an ICM
Voice Announce call, a splash tone will be heard. Ring or Voice Announce is normally determined by
settings at the called station but you may change this by dialing ‘#’ after placing the call. By changing
the mode, a Voice Announce call will ring or a ringing ICM call will allow Voice Announce (toggle).
You can assign a Flex button for Direct Station Selection/Busy Lamp Field (DSS/BLF). The
DSS
/
BLF
button allows you to call another station with the single touch of a button. The button LED will display
the other station’s status (ON=busy, OFF=idle).
When you go off-hook, you may connect to another station or system resource automatically. This
Prime Line Preference may be immediate or delayed allowing you to take other actions during the
delay. Otherwise, you may press another Flex button before going off-hook to override Prime Line
Preference.
If you go off-hook and take no action, Intercom dial-tone will time-out, and after the Howler tone is
received, your phone will be placed out-of-service in Intercom Lock-Out; you then must hang-up to
return the phone to an idle state.
13.2.1.1 Using Camp-On when calling a busy station
If the called party is busy, you may activate Camp-On, Callback or Voice Over at the station. Camp-
On allows you to wait off-hook for the called station to answer. Callback allows you to hang-up, and
when the busy station returns to an idle state, the system will call your Station; after you answer the
callback, the system will call the previously busy station.
If you are the Attendant or Secretary, you may activate Intrusion. You may also use Step Call; dial
the next station by dialing the last digit of the Intercom number.
To activate Custom or Pre-Defined Message Forward:

Press TRANS
/
PGM ,

Dial User Program feature code 51,

Dial the two-digit text Message code (00-20),

Dial any auxiliary input for messages 01-04 and 06-08,

Press
HOLD
/
SAVE
, forward confirmed.
To cancel activated Message:

Press the Fwd Soft button,

Dial #.
To program the Station Custom Message (00) at your station:

Press
TRANS
/
PGM
,

Dial User Program feature code 52,

Enter Message contents, up to 24 characters, using the
following Character Entry Chart:

Press
HOLD
/
SAVE
, to save the message.
To place an Intercom call:

Lift the handset,

Dial the Intercom number of the desired station,

When the call is answered or the Splash tone is heard, begin
speaking with the called party.
To Camp-On (wait off-hook) for a busy station:

Press * and await an answer.
To request a Callback (wait on-hook) for a busy station:

Press the C
ALL
B
ACK
button and hang-up.
To make a Voice Over announcement to a busy station:

Dial #,

After the Splash tone is heard, begin speaking.